Avery Dennison Window Tint in Sacramento: Encore Certified Installer & Complete Product Guide

At Quality Window Tinting, Avery Dennison Encore is the primary window film brand we install — and it has been since we opened our doors in 2005. As an Avery Dennison Certified Installer, Andrey is factory-trained in Encore's specific installation protocols, and every Encore installation we perform carries the manufacturer's warranty and our own lifetime guarantee. If you are searching for an Avery Dennison window tint installer in Sacramento, you are in the right place.

This guide covers everything you need to know about the Avery Dennison Encore product line — from their nano-carbon entry tier to the flagship Encore Supreme IR ceramic — with real specifications drawn directly from the manufacturer's published Product Data Sheet, and a straightforward comparison to SunTek and 3M window films.

The Avery Dennison Encore Product Line: Three Tiers Explained

Avery Dennison manufactures three distinct Encore product tiers for automotive window tinting. Each tier uses a different particle technology — nano-carbon or nano-ceramic — that determines its heat rejection performance. All three tiers block more than 99% of UV radiation and produce zero signal interference.

Performance figures below come directly from the Avery Dennison Encore Product Data Sheet (Rev. 01, 2025-09-03). All measurements are calculated on 1/4" (6mm) clear glass using NFRC methodology and LBNL Window 5.2 software. Actual performance varies by shade selection and vehicle glass.

Encore — Nano-Carbon Technology

The Encore line uses nano-carbon particles distributed throughout the film rather than conventional carbon or dye. Nano-carbon is inherently UV-stable — it will never fade to purple regardless of how many Sacramento summers it sees. This is the entry-level Encore tier, designed for drivers who want strong glare reduction, lifetime fade resistance, and reliable UV protection at the most accessible price point.

• ✓Technology: Nano-carbon particles — non-metallic, non-conductive, no signal interference
• ✓Total Solar Energy Rejected (TSER): 38–42% depending on shade — the number that reflects how much total heat is blocked
• ✓UV Rejection: >99% of UVA and UVB radiation blocked
• ✓Appearance: Rich, consistent dark finish that never fades or shifts to purple
• ✓Warranty: Lifetime to original vehicle owner (manufacturer film warranty)
• ✓Starting Price: Full car from $350 | Full SUV from $400 | Full truck from $350

Encore carbon is the right choice for drivers who want a film that will look good for twenty years, blocks all UV, reduces glare, and won't interfere with GPS, Bluetooth, ADAS systems or toll transponders — at a price well below the ceramic tier. To understand the difference between these film technologies, see our carbon tint vs ceramic tint comparison.

Encore Supreme — Nano-Ceramic Technology

Encore Supreme moves from nano-carbon to nano-ceramic particles — microscopic ceramic compounds embedded throughout the film that selectively target and absorb infrared radiation, the wavelength responsible for the majority of heat you feel through glass. This is our most popular film tier and the one we recommend to most Sacramento drivers.

• ✓Technology: Nano-ceramic particles — non-metallic, non-conductive, zero signal interference
• ✓TSER at 35% VLT: 54% — verified from the Avery Dennison PDS at the shade most customers choose
• ✓TSER range: Up to ~63% at darker shades (label 15 at 17% VLT reads 61%; label 05 at 8% VLT reads 65%)
• ✓UV Rejection: >99% of all UV radiation blocked
• ✓Optical Clarity: Superior to carbon — nano-ceramic particles produce less haze and sharper through-glass visibility
• ✓Warranty: Lifetime to original vehicle owner (manufacturer film warranty)
• ✓Starting Price: Full car from $450 | Full SUV from $550 | Full truck from $450

Encore Supreme is our house recommendation for Sacramento's climate. The jump from ~40% TSER (Encore carbon) to 54% at 35% VLT (Encore Supreme ceramic) is the difference between a car that is noticeably cooler and one that is genuinely comfortable on a 105°F afternoon. For more on how ceramic technology achieves this, see our guide on how ceramic window film works.

Encore Supreme IR — Infrared-Optimized Nano-Ceramic Technology

Encore Supreme IR is the top tier of the Encore line. It uses the same nano-ceramic construction as Encore Supreme, but adds an infrared-optimized formulation that maximizes performance in the infrared bands specifically. The result is the highest heat rejection available in a non-reflective window film — particularly relevant for vehicles with panoramic glass roofs where radiant heat gain is greatest.

• ✓Technology: IR-optimized nano-ceramic — maximum infrared absorption, non-metallic, zero signal interference
• ✓TSER at IR 35 (38% VLT): 57% — verified from the PDS at the most commonly selected shade
• ✓TSER at darkest shade: Up to ~65% (IR 05, 5% VLT) — the maximum total solar energy rejected in the Encore line
• ✓UV Rejection: >99% of all UV radiation blocked
• ✓Best use case: Glass-roof EVs (Tesla Model Y, Model 3 panoramic roof, Rivian), luxury vehicles, large SUVs, any vehicle parked outdoors all day in Sacramento heat
• ✓Warranty: Lifetime to original vehicle owner (manufacturer film warranty)
• ✓Starting Price: Full car from $700 | Full SUV from $850 | Full truck from $700

Encore Supreme IR is the film we recommend most often for Teslas and electric vehicles, where the glass roof panels account for a disproportionate share of cabin heat gain and every degree of reduced AC load extends driving range. The difference between Encore Supreme and Encore Supreme IR is measurable on a BTU meter — and felt immediately on a Sacramento summer afternoon. To understand what the IR and UV numbers actually mean, see our UV vs infrared window tint guide.

Avery Dennison Encore Performance Comparison: Side-by-Side Specs

This table compares all three Encore tiers at representative shade levels. TSER (total solar energy rejected) is the figure that reflects how much total heat is blocked — it is the honest performance number. SIRR (selective infrared rejection) is a narrower measurement that is commonly printed in advertising; it reads significantly higher than TSER and should not be compared as though they measure the same thing.

TSER figures from Avery Dennison Encore Product Data Sheet, Rev. 01 (2025-09-03), calculated on 1/4" (6mm) clear glass using NFRC methodology and LBNL Window 5.2 software. Subject to variation within industry standards. Manufacturer warranty applies to original owner of vehicle only; not transferable. Our own workmanship warranty follows the vehicle.

What “Avery Dennison Certified Installer” Actually Means

Avery Dennison Certified Installer status is a professional designation earned through training and demonstrated competency — it is not simply a matter of buying Encore film through a distributor. Here is what it involves and why it matters for Sacramento customers:

• ✓Factory Training: Andrey has completed hands-on training programs administered directly through Avery Dennison's technical program, covering film handling, heat shrinking techniques, adhesive activation, multi-piece complex installations, and vehicle-specific protocols for each Encore tier. This is the same story as becoming a certified installer for any premium brand — the training is brand-specific and product-specific.
• ✓Access to the Full Encore Line: Certified installers purchase directly through Avery Dennison's authorized distribution network, guaranteeing authentic product with proper lot tracking. This eliminates the risk of counterfeit or grey-market film — a real problem in the window tinting industry, especially with Encore-branded products.
• ✓Manufacturer Warranty Registration: Certified installers can register installations for the Avery Dennison manufacturer warranty. This means your Encore film carries both the manufacturer's lifetime warranty (to the original owner) and our own workmanship warranty, which follows the vehicle regardless of who owns it.
• ✓Quality Assurance Standards: Certified status means every Encore installation meets Avery Dennison's own quality standard — not just the shop's internal bar. For a customer, this is verification, not just a claim.

Avery Dennison Encore vs SunTek and 3M: How the Brands Compare

As certified installers for Avery Dennison Encore, SunTek and 3M, we can give a genuinely informed comparison. All three are professional-grade lines manufactured by major corporations. At the premium ceramic tier, they perform within a narrow band.

The reason Encore Supreme is our house recommendation comes down to consistent supply chain and PDS-documented performance figures. The Avery Dennison Product Data Sheet publishes per-shade TSER, IRER, and SIRR figures for every shade in every tier — it is among the most detailed manufacturer documentation available, which is what allows us to cite specific numbers rather than ranges. At 35% VLT — the shade most customers choose — Encore Supreme reads 54% TSER from the manufacturer's own datasheet. That is a real, sourced number, not a marketing claim.

SunTek CIR and CXP are excellent films we install daily and recommend without hesitation. 3M Ceramic IR Series performs comparably at the top tier. If a customer has a strong preference for either of those brands, we are happy to install them. The comparison matters most at the carbon vs ceramic decision, not between brands at the same tier — see our carbon vs ceramic guide for that comparison.

Why Avery Dennison Encore for Sacramento's Climate

Sacramento Valley's climate is one of the most demanding environments for window film in the United States. Surface temperatures on parked vehicle dashboards regularly exceed 150°F from May through September. UV index hits “extreme” levels on most summer days. Window film is a functional necessity here, not a cosmetic choice.

For vehicles that park outdoors all day, we recommend at minimum Encore Supreme — the 54% TSER at 35% VLT is a substantial improvement over the carbon tier's 40%, and the difference is felt immediately after the film is applied. For vehicles with panoramic or glass roofs, large SUVs, and any application where maximum comfort is the goal, we recommend Encore Supreme IR — the IR-optimized formulation targets the radiant heat component most responsible for interior temperature spikes.

Sacramento's intense UV also means film longevity matters. Encore's nano-ceramic and nano-carbon technologies are inherently UV-stable — they do not degrade under solar exposure the way dyed films do. We see vehicles every week that need tint removal because inferior film has turned purple or started bubbling. Encore film installed on vehicles we tinted eight and ten years ago still looks and performs as it did on day one.

For a deeper explanation of what UV and infrared actually are and how film addresses them differently, see our guide on UV vs infrared window tint.

Andrey and Avery Dennison: 20 Years of Encore Installations

Andrey has been the owner and lead installer at Quality Window Tinting since 2005 — over 20 years working with Avery Dennison Encore film in Sacramento's demanding climate. That longevity means he has seen every vehicle configuration, every installation challenge, and every way film can succeed or fail. It is the reason we chose Encore as our primary brand and have maintained Avery Dennison Certified Installer status throughout.

In 2023, Andrey's work was recognized with a 1st Place finish at the SEMA Show in the Window Film Installation category — the industry's most significant competition for installer skill. That recognition reflects the standard every Encore installation at our shop is held to. To learn more about Andrey and the shop, see our about page.

Avery Dennison Encore Installation Service Area

Our shop at 4847 Auburn Blvd Unit B, Sacramento, CA 95841 is Sacramento's Avery Dennison Certified Installer, serving drivers from across the greater Sacramento region. We install Encore window film for customers from:

Related Guides